2006-2011 Camry Aurion · Service Manual ENGINE

DISASSEMBLY

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Oct 2006 – May 2009 from Jun 2009


1. REMOVE MAGNET STARTER SWITCH ASSEMBLY

  1. A194756
    Remove the nut and disconnect the lead wire from the magnet starter switch.

  1. A194757
    Holding the magnet starter switch on the repair service starter kit, remove the 2 nuts.

  1. Remove the magnet starter switch.


2. REMOVE STARTER YOKE ASSEMBLY

  1. A194758
    Remove the 2 through bolts, and pull out the starter yoke together with the starter commutator end frame.

  1. A194759
    Remove the starter yoke from the starter commutator end frame.


3. REMOVE STARTER ARMATURE PLATE

  1. A194760
    Remove the starter armature plate from the starter yoke.


4. REMOVE STARTER COMMUTATOR END FRAME COVER

  1. A194761
    Using a screwdriver, pry out the starter commutator end frame cover to remove it.


5. REMOVE STARTER ARMATURE ASSEMBLY

  1. A194762E01
    Using snap ring pliers, remove the snap ring and washer.

    NOTICE:
    Do not drop the starter armature.

  1. Remove the starter armature from the starter commutator end frame.


6. REMOVE RUBBER SEAL

  1. A194763
    Remove the rubber seal from the repair service starter kit.


7. REMOVE PLANETARY GEAR

  1. A211512
    Remove the 3 planetary gears from the repair service starter kit.

← DISASSEMBLY (Oct 2006 – May 2009)INSPECTION (Oct 2006 – May 2009) →