INSTALLATION
Removal / installation · Vehicles built from Jun 2009
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009
| 1.
INSTALL TRANSMISSION WIRE |
 |
- Coat a new O-ring of the transmission wire connector with ATF and install it to the transmission wire.
- Install the transmission wire with the bolt.
-
Torque:
- 5.4 N*m{
55 kgf*cm
, 48 in.*lbf
}
Connect the transmission wire connector.
| 2.
CONNECT TRANSMISSION WIRE |
 |
- Coat the O-ring of the ATF temperature sensor with ATF.
Install the ATF temperature sensor with the lock plate and bolt.
-
Torque:
- 6.6 N*m{
67 kgf*cm
, 58 in.*lbf
}
Connect the 7 shift solenoid valve connectors.
| 3.
INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY |
 |
- Install the 2 magnets in the oil pan.
Apply adhesive or equivalent to new 18 bolts.
- Adhesive:
- Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent
- Using a new gasket, install the oil pan to the transaxle case with the 18 bolts.
-
Torque:
- 7.8 N*m{
79 kgf*cm
, 69 in.*lbf
}
- NOTICE:
- Since the bolts should be seal bolts, apply adhesive to the bolts and tighten them within 10 minutes of application.
| 4.
INSTALL AUTOMATIC TRANSAXLE ASSEMBLY |
 |
- HINT:
-
Click here.