2006-2011 Camry Aurion · Service Manual TRANSMISSION

REMOVAL

Removal / installation · Vehicles built Jun 2006 – Sep 2006

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009


1. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY

HINT:
Click here.


2. REMOVE AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY

  1. C091925
    Remove the 18 bolts, oil pan and gasket.

    NOTICE:
    Some fluid will remain in the oil pan. remove all the pan bolts, and carefully remove the oil pan assembly.

  1. D030865E01
    Remove the 2 magnets from the oil pan.

  1. Examine particles in the pan.

    1. AT00103
      Collect any steel chips with the removed magnets. Look carefully at the chips and particles in the pan and on the magnets to see the type of wear which might be found in the transaxle.
      Steel (magnetic): bearing, gear and plate wear
      Brass (non-magnetic): bearing wear

      Result:
      Steel (magnetic):
      bearing, gear and plate wear
      Brass (non-magnetic):
      bearing wear


3. DISCONNECT TRANSMISSION WIRE

  1. C135717
    Disconnect the 7 shift solenoid valve connectors.

  1. Remove the bolt and lock plate, and disconnect the ATF temperature sensor.


4. REMOVE TRANSMISSION WIRE

  1. D030866
    Disconnect the transmission wire connector.

  1. Remove the bolt and transmission wire.

  1. D030867
    Remove the O-ring from the transmission wire.

← COMPONENTS (from Jun 2006)REMOVAL (Oct 2006 – May 2009) →