2006-2011 Camry Aurion · Service Manual TRANSMISSION

INSPECTION

Inspection · Vehicles built from Oct 2006


INSPECT TRANSMISSION CONTROL SWITCH

  1. G028380E11
    Measure the resistance according to the value(s) in the table below when the shift lever is moved to each position.

    Standard resistance:
    Tester Connection
    Shift Position
    Specified Condition
    3 - 7
    S, "+" and "-"
    Below 1 Ω
    Except S, "+" and "-"
    10 kΩ or higher
    2 - 5
    Press continuously "+" (Upshift)
    Below 1 Ω
    S
    10 kΩ or higher
    1 - 5
    Press continuously "-" (Downshift)
    Below 1 Ω
    S
    10 kΩ or higher

    If the resistance value is not as specified, replace the shift lever assembly.

← DISASSEMBLY (from Oct 2006)ADJUSTMENT (from Oct 2006) →