REASSEMBLY
Removal / installation · Vehicles built from Oct 2006
| 1.
INSTALL SHIFT LOCK CONTROL ECU SUB-ASSEMBLY |
 |
- Install the shift lock control ECU sub-assembly to the shift lever assembly.
| 2.
INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY |
 |
- Insert the indicator light wire into the shift lever assembly while aligning the groove on the unit with the indicator light guide key.
Install the indicator light guide by turning it clockwise until it securely locks.
Install the indicator light wire to the clamp on the shift lever assembly.
- Connect terminals (4) and (8) of the indicator light wire.
Push in the stopper.