2006-2011 Camry Aurion · Service Manual TRANSMISSION

REMOVAL

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Oct 2006 – May 2009 from Jun 2009


1. REMOVE AIR CONDITIONING UNIT (for LHD)

HINT:
Click here.


2. REMOVE AIR CONDITIONING UNIT (for RHD)

HINT:
Click here.


3. REMOVE CENTER AIRBAG SENSOR ASSEMBLY (for LHD)
  1. Turn back the carpet.

  1. C133884
    Disconnect the holder (with connectors).

  1. Remove the 3 bolts and center airbag sensor assembly.


4. REMOVE CENTER AIRBAG SENSOR ASSEMBLY (for RHD)
  1. Turn back the carpet.

  1. C133884
    Disconnect the holder (with connectors).

  1. Remove the 3 bolts and center airbag sensor assembly.


5. REMOVE COOL AIR INTAKE DUCT SEAL

  1. A141576E01
    Remove the 7 clips and intake duct seal.


6. REMOVE AIR CLEANER INLET ASSEMBLY

  1. A132969
    Remove the 2 bolts, clamp and air cleaner inlet.


7. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

  1. A135704
    Disconnect the 3 vacuum hoses.

  1. A135705E01
    Disconnect the mass air flow meter connector (*1).

  1. Disconnect the No. 2 ventilation hose (*2).

  1. Disconnect the hose band (*3).

  1. A135706
    Disconnect the 3 bands, and remove the air cleaner cap sub-assembly.


8. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

  1. A132971
    Disconnect the vacuum hose and hose clamp.

  1. Remove the 3 bolts and air cleaner case.


9. REMOVE NO. 1 AIR CLEANER INLET

  1. A132970
    Remove the bolt and No. 1 air cleaner inlet.


10. DISCONNECT NO. 2 SHIFT CABLE GROMMET RETAINER

  1. C132234
    Turn back the carpet.

  1. Remove the 2 bolts and disconnect the No. 2 shift cable grommet retainer.

  1. Remove the No. 2 shift cable grommet retainer.


11. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY

  1. C135015
    Disconnect the end of the transmission control cable assembly from the shift lever assembly.

  1. Disconnect the transmission control cable assembly from the shift lever assembly while pushing the 2 claws of the transmission control cable assembly.

  1. C132236
    Remove the nut and transmission control cable assembly from the control shaft lever.

  1. C132237
    Remove the clip and disconnect the transmission control cable assembly from the No. 1 control cable bracket.

  1. Pull out the transmission control cable assembly from the body.

← REMOVAL (Oct 2006 – May 2009)ADJUSTMENT (Oct 2006 – May 2009) →