REASSEMBLY
Removal / installation · Vehicles built from Jun 2006
| 1. INSTALL RELEASE CYLINDER BLEEDER PLUG |
Install the bleeder plug to the cylinder body.
- Torque:
- 8.3 N*m{ 85 kgf*cm , 73 in.*lbf }
| 2. INSTALL CLUTCH RELEASE CYLINDER KIT |
Install the bleeder plug cap to the bleeder plug.
Install a new spring to the cylinder body.
Coat the piston with lithium soap base glycol grease as shown in the illustration.

Install the piston to the cylinder body.
- NOTICE:
- Be careful not to damage the inside of the cylinder body.
Install the push rod to the cylinder body.
Install the boot to the cylinder body.
