2006-2011 Camry Aurion · Service Manual TRANSMISSION

DISASSEMBLY

Removal / installation · Vehicles built from Jun 2006


1. REMOVE 4TH DRIVEN GEAR

  1. C092858E02
    Using SST and a press, remove the output shaft rear bearing (inner race) and 4th driven gear.
    SST
    09950-00020  


2. REMOVE OUTPUT GEAR SPACER

  1. C069641
    Remove the output gear spacer from the output shaft.


3. REMOVE 2ND GEAR

  1. C092859E01
    Using SST and a press, remove the 3rd driven gear and 2nd gear from the output shaft.
    SST
    09950-00020  


4. REMOVE NO. 2 SYNCHRONIZER RING SET

  1. C069643
    Remove the No. 2 synchronizer ring set from the No. 1 transmission clutch hub.


5. REMOVE 2ND GEAR NEEDLE ROLLER BEARING

  1. C069644
    Remove the 2nd gear needle roller bearing from the output shaft.


6. REMOVE 2ND GEAR BEARING SPACER

  1. C069645
    Remove the 2nd gear bearing spacer from the output shaft.


7. REMOVE 2ND GEAR BUSHING

  1. C069646
    Remove the 2nd gear bushing from the output shaft.


8. REMOVE 2ND GEAR BUSHING BALL

  1. C083814
    Using a magnetic finger, remove the 2nd gear bush ball from the output shaft.


9. REMOVE 1ST GEAR

  1. C092860E02
    Using SST and a press, remove the No. 1 transmission clutch hub and 1st gear from the output shaft.
    SST
    09950-00020  


10. REMOVE NO. 1 SYNCHRONIZER RING SET

  1. C069649
    Remove the No. 1 synchronizer ring set from the 1st gear.


11. REMOVE 1ST GEAR NEEDLE ROLLER BEARING

  1. C069650
    Remove the 1st gear needle roller bearing from the output shaft.


12. REMOVE OUTPUT SHAFT FRONT BEARING

  1. C092861E02
    Using SST and a press, remove the output shaft front bearing (inner race) from the output shaft.
    SST
    09950-00020  
    09950-60010   (09951-00320)
    09950-70010   (09951-07150)

    NOTICE:
    Do not overtighten the SST.


13. REMOVE REVERSE GEAR

  1. C069652
    Remove the No. 1 transmission clutch hub, 3 No. 1 synchromesh shifting keys, and 3 No. 1 synchromesh shifting key springs from the reverse gear.

← COMPONENTS (from Jun 2006)INSPECTION (from Jun 2006) →