2006-2011 Camry Aurion · Service Manual CRUISE CONTROL SYSTEM

P0607 Control Module Performance

Diagnostic trouble codes · Vehicles built from Jun 2009

Versions by build date: Oct 2006 – May 2009 from Jun 2009

DESCRIPTION

This DTC indicates the internal abnormalities of the ECM.
DTC No.
DTC Detection Condition
Trouble Area
P0607
When both of the following conditions are met:
  1. STP signals input to the ECM supervisory CPU and control ECU are different for 0.15 sec. or more
  2. 0.4 sec. have passed after cruise cancel input signal (STP input) is input to the ECM
ECM

HINT:
The ECM receives signals from each sensor to control all functions of the cruise control system. When a trouble code is detected, the fail-safe function remains on until the ignition switch is turned off.


INSPECTION PROCEDURE


1. REPLACE ECM
  1. Replace the ECM (Click here).


NEXT

END


← P0607 Control Module Performance (Oct 2006 – May 2009)Cruise Control Switch Circuit (Oct 2006 – May 2009) →