B2785 Communication Malfunction between ECUs Connected by LIN
Diagnostic trouble codes · Vehicles built Oct 2006 – May 2009
Versions by build date: Oct 2006 – May 2009 from Jun 2009
DESCRIPTION
This DTC is output when LIN communication from the certification ECU stops for a certain amount of time.- HINT:
- If this DTC B2785 is detected simultaneously with DTC B2786, B2789 or B2287, troubleshoot DTC B2786, B2789 or B2287 first.
DTC No.
B2785
B2786
B2789
B2287
Trouble Area
DTC Output
○
○
-
-
Wire harness
(Certification ECU - Steering lock ECU)
○
-
○
-
Wire harness
(Certification ECU - ID code box)
○
-
-
○
Wire harness
(Certification - Main body ECU (Instrument panel J/B))
- ○: DTC is output
- -: DTC is not output
| DTC No. |
DTC Detection Condition |
Trouble Area |
| B2785 |
|
|
WIRING DIAGRAM


INSPECTION PROCEDURE
- NOTICE:
- If the certification ECU or ID code box is replaced, register the key and ECU communication ID.
- If the steering lock ECU or main body ECU (instrument panel J/B) is replaced, register the ECU code and ECU communication ID.
- If the certification ECU or ID code box is replaced, register the key and ECU communication ID.
| 1. CHECK DTC OUTPUT |
Delete the DTCs (Click here).
Recheck for DTCs (Click here).
- Result:
Result
Proceed to
B2785 output recurs
A
B2785 output does not recur
B
|
|
||||
| A | |
| 2. REPLACE CERTIFICATION ECU |
Replace the certification ECU.
| NEXT | |
| 3. ELECTRICAL KEY REGISTRATION |
Register the electrical key code in the certification ECU.
| NEXT | |
| 4. ECU COMMUNICATION ID REGISTRATION |
Register the ECU communication ID between the ID code box and ECM.
| NEXT | |
| 5. CHECK DTC OUTPUT |
Delete the DTCs (Click here).
Recheck for DTCs (Click here).
- Result:
Result
Proceed to
B2785 output recurs
A
B2785 output does not recur
B
|
|
||||
| A | |
| 6. REPLACE MAIN BODY ECU (INSTRUMENT PANEL J/B) |
Replace the main body ECU (instrument panel J/B).
| NEXT | |
| 7. ECU CODE REGISTRATION |
Register the ECU code between the ECUs connected by LIN communication.
| NEXT | |
| 8. CHECK DTC OUTPUT |
Delete the DTCs (Click here).
Recheck for DTCs (Click here).
- Result:
Result
Proceed to
B2785 output recurs
A
B2785 output does not recur
B
|
|
||||
| A | |
| 9. REPLACE STEERING LOCK ECU |
Replace the steering lock ECU.
| NEXT | |
| 10. ECU CODE REGISTRATION |
Register the ECU code between the ECUs connected by LIN communication.
| NEXT | |
| 11. CHECK DTC OUTPUT |
Delete the DTCs (Click here).
Recheck for DTCs (Click here).
- Result:
Result
Proceed to
B2785 output recurs
A
B2785 output does not recur
B
|
|
||||
| A | ||
| ||
