HOW TO PROCEED WITH TROUBLESHOOTING
Troubleshooting · Vehicles built Oct 2006 – May 2009
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009
- HINT:
- Use this procedure to troubleshoot the theft deterrent system.
- The intelligent tester should be used in step 3.
| 1.VEHICLE BROUGHT TO WORKSHOP |
| NEXT |
|
 |
|
|
| 2.CUSTOMER PROBLEM ANALYSIS |
Interview the customer to confirm the trouble (Click here).
| NEXT |
|
 |
|
|
| NEXT |
|
 |
|
|
If the fault is not listed in the problem symptoms table, proceed to A.
If the fault is listed in the problem symptoms table, proceed to B.
|
B.
|
 |
|
|
| A |
|
 |
|
|
| 5.PERFORM TROUBLESHOOTING ACCORDING TO MALFUNCTION SYMPTOM |
Terminals of ECU (Click here)
| 6.ADJUST, REPAIR OR REPLACE |
| NEXT |
|
 |
|
|
| NEXT |
|
 |
|
|