2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

DISPLAY CHECK MODE

Troubleshooting · Vehicles built Oct 2006 – May 2009

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009

HINT:
  1. This mode checks the color display on the display.
  2. Illustrations may differ from the actual vehicle depending on the device settings and options. Therefore, some detailed areas may not be shown exactly the same as on the actual vehicle.


ENTER DIAGNOSTIC MODE (Click here)

DISPLAY CHECK

  1. E120055E02
    Select "Display Check" from the "Diagnosis MENU" screen.


COLOR BAR CHECK

  1. E120053E36
    Select "Color Bar Check" from the "Display Check" screen.

  2. E120102
    Select a color bar from the "Color Bar Check Mode" screen.

  3. Check the display color.

    HINT:
    1. The entire screen turns to the color or stripe selected.
    2. Touching the display will return to the "Color Bar Check" screen.


TOUCH SWITCH CHECK

  1. E125809E06
    Select "Touch Switch Check" from the "Display Check" screen.

  2. E120103
    Touch the display anywhere in the open area to perform the check when the "Touch Switch Check" screen is displayed.

    HINT:
    1. A "+" mark is displayed where the display is touched.
    2. The "+" mark remains on the display even after the finger is removed.


PANEL SWITCH CHECK

  1. E125809E07
    Select "Panel Switch Check" from the "Display Check" screen.

  2. I100041E07
    Operate each switch and check that the switch names and condition are correctly displayed.
    Display
    Contents
    Push switch name/*1
    1. Name of the pressed switch is displayed.
    2. If more than one switch is pressed, "MULTIPLE" is displayed.
    Rotary switch name/*2
    Name of the rotary switch is displayed.
    Rotary switch direction/*3
    Direction of the rotary switch is displayed.


VEHICLE SIGNAL CHECK

  1. E125809E08
    Select "Vehicle Signal Check" from the "Display Check" screen.

  2. E125810
    When the "Vehicle Signal Check Mode" screen is displayed, check all the vehicle signal conditions.

    HINT:
    1. Only conditions having inputs are displayed.
    2. This screen is updated once per second when input signals to the vehicle are changed.
    3. For details of this function, refer to DIAGNOSIS DISPLAY DETAILED DESCRIPTION (Click here).

← DISPLAY CHECK MODE (Jun 2006 – Sep 2006)BLUETOOTH TEL CHECK MODE (Jun 2006 – Sep 2006) →