2006-2011 Camry Aurion · Service Manual SUSPENSION & AXLE

DISPOSAL

Removal / installation · Vehicles built from Jun 2006


1. DISPOSE OF FRONT SHOCK ABSORBER

  1. C137486E01
    Fully extend the shock absorber rod.

  1. Using a drill, make a hole in the cylinder between A and B as shown in the illustration to discharge the gas inside.

    CAUTION:
    1. Be careful when drilling because shards of metal may fly about. Always use the proper safety equipment.
    2. The gas is colorless, odorless and non-poisonous.

← INSTALLATION (from Jun 2009)COMPONENTS (from Jun 2006) →