2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

SYSTEM DESCRIPTION

Troubleshooting · Vehicles built Jun 2006 – May 2009

Versions by build date: Jun 2006 – May 2009 from Jun 2009


POWER DOOR LOCK CONTROL SYSTEM DESCRIPTION
  1. The power door lock system locks/unlocks all the doors.
    The master switch and the door control switch on the passenger door send "lock/unlock" request signals to the main body ECU. Then, the main body ECU sends these request signals to the lock motors in each door to lock/unlock all the doors at once in response to the inputs.
    Operating the driver's door lock using a mechanical key sends request signals to lock/unlock the doors to the main body ECU.


FUNCTION OF MAIN COMPONENT
*1: LHD only
*2: RHD only
Components
Function
Multiplex network master switch assembly (Door control switch)
Door control switch on master switch assembly locks/unlocks all doors.
Front passenger side door control switch (*1)
Door control switch locks/unlocks all doors.
Door courtesy switch
Placed on each door. Detects door status (open or closed) and outputs data to main body ECU. Turns on when door is open and turns off when door is closed.
Driver side door lock
  1. Built-in motor locks/unlocks door.
  2. Built-in door control switch (key-linked) detects door key operation's door status (locked or unlocked) and outputs data to main body ECU.
  3. Built-in position switch detects door status (locked or unlocked) and outputs data to main body ECU. This switch turns off when door is locked and turns on when door is unlocked.
Front passenger side door lock
  1. Built-in motor locks/unlocks door.
  2. Built-in position switch detects door status (locked or unlocked) and outputs data to main body ECU. This switch turns off when door is locked and turns on when door is unlocked.
Rear LH and RH door locks
  1. Built-in motor locks/unlocks door.
  2. Built-in position switch detects door status (locked or unlocked) and outputs data to main body ECU. This switch turns off when door is locked and turns on when door is unlocked. (*2)
Luggage compartment door lock
Built-in motor unlocks door.

SYSTEM FUNCTION

HINT:
The following functions' default settings are ON. Some of these functions can be customized (Click here).

  1. This system is controlled by the main body ECU. The main body ECU outputs signals to each door lock motor. The door lock control system of the vehicle has the following functions:

    Function
    Outline
    Manual lock and unlock function
    This function can lock or unlock all doors by the door lock control switch operation.
    Key-linked lock and unlock function
    This function, which is linked with the key cylinder, can lock or unlock all the doors when a lock or unlock operation is effected.
    Manual unlock prohibition function
    Performing the door lock operation with a mechanical key (transmitter) will prohibit the unlock operation by the door lock control switch.
    Key lock-in prevention function
    If a door lock operation is performed when the mechanical key is in ignition key cylinder, all the doors will be unlocked.

← SYSTEM DIAGRAM (from Jun 2009)SYSTEM DESCRIPTION (from Jun 2009) →