SYSTEM DESCRIPTION
Troubleshooting · Vehicles built Jun 2006 – Sep 2006
Versions by build date: Jun 2006 – Sep 2006 from Oct 2006
| POWER WINDOW CONTROL SYSTEM DESCRIPTION |
The power window control system controls the power window operation using the power window regulator motors. The main controls of this system are the power window regulator master switch, which is mounted on the driver side door, and the power window regulator switches, which are mounted on the passenger side door and rear doors. Operating a window switch results in electrical power being transmitted to the corresponding power window regulator motor.
The power window control system has the following functions:
Function
Outline
Manual up-and-down function
Function that causes window to go up while power window switch is being pulled halfway up and to go down while pushed halfway down. Window stops as soon as the switch is released.
Driver's door auto up-and-down function
Function that enables windows of driver's doors to be fully opened or closed by one press of power window switch.
Jam protection function
Function that automatically stops power window and moves it downward if a foreign object gets jammed in door window during auto-up operation.
Remote control function
Function that allows power window master switch to control MANUAL up-and-down operations of front passenger door window and rear door windows.
Key-off operation function
Function that makes it possible to operate power window for approx. 45 seconds after the ignition switch is turned to the ON position or off, if either front door is not opened.
Key-linked up-and-down function
Function that causes window to go up while driver's door key is turned to lock side for more than 1.5 seconds and to go down while turned to unlock side for more than 1.5 seconds. Window stops as soon as the key is returned to original position.
Diagnosis
Function that allows power window switch to make a diagnosis for failed section when power window switch detects a malfunction in power window system. Power window switch light comes on or blinks to inform driver.
Fail-safe
A fail-safe function to disable a part of power window functions if pulse sensor in power window motor has a malfunction.
Driver's door auto up-and-down function and remote control function are disabled.