2006-2011 Camry Aurion · Service Manual BODY

INSPECTION

Inspection · Vehicles built from Oct 2006


INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/o Memory)

  1. B148251
    Inspect the outer mirror switch.

    1. Measure the resistance according to the value(s) in the table below when the switch is operated.

      Standard resistance:
      Select "L" on the left/right adjustment switch:
      Tester Connection
      Switch Position
      Specified Condition
      4 - 8
      UP
      Below 1 Ω
      6 - 7
      4 - 7
      DOWN
      6 - 8
      5 - 8
      LEFT
      6 - 7
      5 - 7
      RIGHT
      6 - 8
      Select "R" on the left/right adjustment switch:
      Tester Connection
      Switch Position
      Specified Condition
      3 - 8
      UP
      Below 1 Ω
      6 - 7
      3 - 7
      DOWN
      6 - 8
      2 - 8
      LEFT
      6 - 7
      2 - 7
      RIGHT
      6 - 8


INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/ Memory)

  1. B150520
    Inspect the outer mirror switch.

    1. Measure the resistance according to the value(s) in the table below when the switch is operated.

      Standard resistance:
      Tester Connection
      Switch Position
      Specified Condition
      2 - 3
      OFF
      10 kΩ or higher
      UP
      225 to 275 Ω
      DOWN
      437 to 503 Ω
      LEFT
      744 to 856 Ω
      RIGHT
      437 to 503 Ω
      1 - 2
      L
      90 to 110 Ω
      R
      10 Ω or less

← REMOVAL (from Jun 2009)INSTALLATION (Oct 2006 – May 2009) →