TERMINALS OF ECU
System information · Vehicles built from Jun 2009
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009
| COMBINATION METER ASSEMBLY (for 2AZ-FE) |
*2: with Multi-information Display


| Symbols (Terminal No.) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
| B (F1-1) - Body ground |
V - Body ground |
Battery |
Always |
10 to 14 V |
| B2 (F1-2) - Body ground |
R - Body ground |
Battery |
Always |
10 to 14 V |
| B (F1-3) - Body ground |
G - Body ground |
Turn indicator light signal |
Turn the ignition switch on (IG), turn signal RH indicator light OFF |
Below 1 V |
| Turn the ignition switch on (IG), turn signal RH indicator light is blinking |
10 to 14 V |
|||
| B (F1-4) - Body ground |
B - Body ground |
Turn indicator light signal |
Turn the ignition switch on (IG), turn signal LH indicator light OFF |
Below 1 V |
| Turn the ignition switch on (IG), turn signal LH indicator light is blinking |
10 to 14 V |
|||
| CHG- (F1-6) - Body ground |
Y - Body ground |
Charge warning light signal |
Turn the ignition switch on (IG), CHARGE warning light OFF |
10 to 14 V |
| Turn the ignition switch on (IG), CHARGE warning light ON |
Below 1 V |
|||
| S (F1-7) - Body ground |
BE - Body ground |
Engine oil pressure warning light signal |
Turn the ignition switch on (IG), engine oil pressure warning light OFF |
10 to 14 V |
| Turn the ignition switch on (IG), engine oil pressure warning light ON |
Below 1 V |
|||
| CHK (F1-9) - Body ground |
R - Body ground |
Check engine warning light signal |
Turn the ignition switch on (IG), CHECK ENGINE warning light ON |
Below 3 V |
| Turn the ignition switch on (IG), CHECK ENGINE warning light OFF |
10 to 14 V |
|||
| SI (F1-10) - Body ground |
W - Body ground |
Speed signal for other systems (Input) |
Turn the wheel slowly |
Pulse generation (See waveform 1) |
| +S (F1-11) - Body ground |
V - Body ground |
Speed signal for other systems (Output) |
Turn the ignition switch on (IG), turn the wheel slowly |
Pulse generation (See waveform 1) |
| E2 (F1-12) - Body ground |
W-B - Body ground |
Ground (Power ground) |
Always |
Below 1 V |
| IG+ (F1-13) - Body ground |
GR - Body ground |
Ignition switch signal |
Turn the ignition switch off |
Below 1 V |
| Turn the ignition switch on (IG) |
10 to 14 V |
|||
| B/LE (F1-15) - Body ground |
LG - Body ground |
Brake fluid level warning light signal |
Turn the ignition switch on (IG), BRAKE warning light OFF |
10 to 14 V |
| Turn the ignition switch on (IG), BRAKE warning light ON |
Below 1 V |
|||
| P/SB (F1-16) (*1) - Body ground |
G - Body ground |
Passenger seat belt warning light signal |
Sit on the front passenger seat, Turn the ignition switch on (IG), front passenger seat belt warning light OFF |
10 to 14 V |
| Sit on the front passenger seat, Turn the ignition switch on (IG), front passenger seat belt warning light is blinking |
10 to 14 V ←→ Below 1 V |
|||
| DISP (F1-17) (*2) - Body ground |
V - Body ground |
Steering pad switch signal |
Turn the ignition switch on (IG), DISP switch off |
4 to 6 V |
| Turn the ignition switch on (IG), DISP switch ON |
Below 1 V |
|||
| PBKL (*1) (F1-19) - Body ground |
BR - Body ground |
Front passenger seat buckle switch signal |
Turn the ignition switch on (IG), front passenger seat belt is unfastened |
Below 1 V |
| Turn the ignition switch on (IG), front passenger seat belt is fastened |
10 to 14 V |
|||
| FR (F1-20) - Body ground |
GR - Body ground |
Fuel signal |
Turn the ignition switch on (IG), fuel level is FULL |
Below 1 V |
| Turn the ignition switch on (IG), fuel level is EMPTY |
3 to 7 V |
|||
| FE (F1-21) - Body ground |
P - Body ground |
Ground (Fuel ground) |
Always |
Below 1 V |
| CANL (F1-22) - Body ground |
W - Body ground |
CAN communication signal |
- |
- |
| CANH (F1-23) - Body ground |
B - Body ground |
CAN communication signal |
- |
- |
| ES (F1-24) - Body ground |
BR - Body ground |
Ground (Signal ground) |
Always |
Below 1 V |
Waveform 1 (Reference): Using an oscilloscope:

Item
Condition
Tool setting
5 V/DIV., 20 ms./DIV.
Vehicle condition
Driving at approx. 20 km/h (12 mph)
| COMBINATION METER INNER CIRCUIT (for 2AZ-FE) |
*2: with Multi-information Display






| Terminal No. |
Wire harness side |
|
| F1 |
1 |
MPX-B Fuse (B) |
| 2 |
DOME Fuse (B2) |
|
| 3 |
Turn Signal Flasher (B) |
|
| 4 |
Turn Signal Flasher (B) |
|
| 5 |
- |
|
| 6 |
Generator (CHG-) |
|
| 7 |
Oil Pressure Warning Switch (S) |
|
| 8 |
- |
|
| 9 |
ECM (CHK) |
|
| 10 |
Skid Control ECU (SI) |
|
| 11 |
Each Part That Uses Speed Signal (+S) |
|
| 12 |
Ground (E2) |
|
| 13 |
No. 2 GAUGE Fuse (IG+) |
|
| 14 |
- |
|
| 15 |
Brake Fluid Level Warning Switch (B/LE) |
|
| 16 |
Clock Assembly (P/SB) (*1) |
|
| 17 |
Steering Pad Switch (DISP) (*2) |
|
| 18 |
- |
|
| 19 |
Front Passenger Seat Buckle Switch Signal (PBKL) (*1) |
|
| 20 |
Fuel Sender Gauge Assembly (FR) |
|
| 21 |
Fuel Sender Gauge Assembly (FE) |
|
| 22 |
CAN Communication Line (CANL) |
|
| 23 |
CAN Communication Line (CANH) |
|
| 24 |
Ground (ES) |
|
| COMBINATION METER ASSEMBLY (for 2GR-FE) |
*2: with Multi-information Display


| Symbols (Terminal No.) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
| B (F1-1) - Body ground |
V - Body ground |
Battery |
Always |
10 to 14 V |
| B2 (F1-2) - Body ground |
R - Body ground |
Battery |
Always |
10 to 14 V |
| S (F1-8) - Body ground |
BE - Body ground |
Engine oil pressure warning light signal |
Turn the ignition switch on (IG), engine oil pressure warning light OFF |
10 to 14 V |
| Turn the ignition switch on (IG), engine oil pressure warning light ON |
Below 1 V |
|||
| P/SB (F1-9) (*1) - Body ground |
P - Body ground |
Passenger seat belt warning light signal |
Sit on the front passenger seat, turn the ignition switch on (IG), front passenger seat belt warning light OFF |
10 to 14 V |
| Sit on the front passenger seat, turn the ignition switch on (IG), front passenger seat belt warning light is blinking |
10 to 14 V ←→ Below 1 V |
|||
| IG+ (F1-13) - Body ground |
GR - Body ground |
Ignition switch signal |
Turn the ignition switch off |
Below 1 V |
| Turn the ignition switch on (IG) |
10 to 14 V |
|||
| CANH (F1-17) - Body ground |
B - Body ground |
CAN communication signal |
- |
- |
| CANL (F1-18) - Body ground |
W - Body ground |
CAN communication signal |
- |
- |
| DISP (F1-22) (*2) - Body ground |
V - Body ground |
Steering pad switch signal |
Turn the ignition switch on (IG), DISP switch off |
4 to 6 V |
| Turn the ignition switch on (IG), DISP switch ON |
Below 1 V |
|||
| CHG- (F1-23) - Body ground |
L - Body ground |
Charge warning light signal |
Turn the ignition switch on (IG), CHARGE warning light OFF |
10 to 14 V |
| Turn the ignition switch on (IG), CHARGE warning light ON |
Below 1 V |
|||
| ES (F1-24) - Body ground |
BR - Body ground |
Ground (Signal ground) |
Always |
Below 1 V |
| B (F2-1) - Body ground |
G - Body ground |
Turn indicator light signal |
Turn the ignition switch on (IG), turn signal RH indicator light OFF |
Below 1 V |
| Turn the ignition switch on (IG), turn signal RH indicator light ON |
10 to 14 V |
|||
| B (F2-2) - Body ground |
L - Body ground |
Turn indicator light signal |
Turn the ignition switch on (IG), turn signal LH indicator light OFF |
Below 1 V |
| Turn the ignition switch on (IG), turn signal LH indicator light ON |
10 to 14 V |
|||
| CHK (F2-4) - Body ground |
R - Body ground |
Check engine warning light signal |
Turn the ignition switch on (IG), CHECK ENGINE warning light ON |
Below 3 V |
| Turn the ignition switch on (IG), CHECK ENGINE warning light OFF |
10 to 14 V |
|||
| LVWG (F2-5) - Body ground |
L - Body ground |
Headlight beam level control indicator light signal |
Turn the ignition switch on (IG), LEVELING indicator light OFF |
10 to 14 V |
| Turn the ignition switch on (IG), LEVELING indicator light ON |
Below 2 V |
|||
| B/LE (F2-6) - Body ground |
LG - Body ground |
Brake fluid level warning light signal |
Turn the ignition switch on (IG), BRAKE warning light OFF |
10 to 14 V |
| Turn the ignition switch on (IG), BRAKE warning light ON |
Below 1 V |
|||
| PBKL (F2-8) (*1) - Body ground |
BR - Body ground |
Front passenger seat buckle switch signal |
Turn the ignition switch on (IG), front passenger seat belt is unfastened |
Below 1 V |
| Turn the ignition switch on (IG), front passenger seat belt is fastened |
10 to 14 V |
|||
| +S (F2-12) - Body ground |
V - Body ground |
Speed signal for other systems (Output) |
Turn the wheel slowly |
Pulse generation (See waveform 1) |
| SI (F2-14) - Body ground |
W - Body ground |
Speed signal for other systems (Input) |
Turn the ignition switch on (IG), turn the wheel slowly |
Pulse generation (See waveform 1) |
| FR (F2-15) - Body ground |
GR - Body ground |
Fuel signal |
Turn the ignition switch on (IG), fuel level is FULL |
Below 1 V |
| Turn the ignition switch on (IG), fuel level is EMPTY |
3 to 7 V |
|||
| FE (F2-16) - Body ground |
P - Body ground |
Ground (Fuel ground) |
Always |
Below 1 V |
Waveform 1 (Reference): Using oscilloscope:

Item
Condition
Tool setting
5 V/DIV., 20 ms/DIV.
Vehicle condition
Driving at approx. 20 km/h (12 mph)
| COMBINATION METER INNER CIRCUIT (for 2GR-FE) |
*2: with Multi-information Display






| Terminal No. |
Wire harness side |
|
| F1 |
1 |
MPX-B Fuse (B) |
| 2 |
DOME Fuse (B2) |
|
| 3 |
- |
|
| 4 |
- |
|
| 5 |
- |
|
| 6 |
- |
|
| 7 |
- |
|
| 8 |
Oil Pressure Warning Switch (S) |
|
| 9 |
Clock Assembly (P/SB) (*1) |
|
| 10 |
- |
|
| 11 |
- |
|
| 12 |
Ground (E2) |
|
| 13 |
No. 2 GAUGE Fuse (IG+) |
|
| 14 |
- |
|
| 15 |
- |
|
| 16 |
- |
|
| 17 |
CAN Communication Line (CANH) |
|
| 18 |
CAN Communication Line (CANL) |
|
| 19 |
- |
|
| 20 |
- |
|
| 21 |
- |
|
| 22 |
Steering Pad Switch (DISP) (*2) |
|
| 23 |
Alternator L Terminal (CHG-) |
|
| 24 |
Ground (ES) |
|
| F2 |
1 |
Turn Signal Flasher (B) |
| 2 |
Turn Signal Flasher (B) |
|
| 3 |
- |
|
| 4 |
ECM (CHK) |
|
| 5 |
Headlight Beam Level Control ECU (LVWG) |
|
| 6 |
Brake Fluid Level Warning Switch (B/LE) |
|
| 7 |
- |
|
| 8 |
Front Seat Inner Belt Assembly (Passenger Seat) (PBKL) (*1) |
|
| 9 |
- |
|
| 10 |
- |
|
| 11 |
- |
|
| 12 |
Each part that uses speed signal (+S) |
|
| 13 |
- |
|
| 14 |
Skid Control ECU (SI) |
|
| 15 |
Fuel Sender Gauge Assembly (FR) |
|
| 16 |
Fuel Sender Gauge Assembly (FE) |
|