TERMINALS OF ECU
System information · Vehicles built from Jun 2009
Versions by build date: Oct 2006 – May 2009 from Jun 2009
| CLOCK ASSEMBLY |


| Symbols (Terminal No.) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
| B (F3-1) - Body ground |
R - Body ground |
Battery |
Always |
10 to 14 V |
| ACC (F3-2) - Body ground |
L - Body ground |
Ignition switch signal (Accessory) |
Ignition switch off |
Below 1 V |
| Ignition switch on (ACC) |
10 to 14 V |
|||
| IG (F3-3) - Body ground |
GR - Body ground |
Ignition switch signal |
Ignition switch off |
Below 1 V |
| Ignition switch on (IG) |
10 to 14 V |
|||
| ILL+ (F3-4) - Body ground |
BE - Body ground |
Illumination signal |
Ignition switch on (IG), light control switch OFF |
10 to 14 V |
| Ignition switch on (IG), cover the automatic light control sensor by hand, and light control switch TAIL/HEAD |
Below 1 V |
|||
| A/B (F3-6) - Body ground |
V - Body ground |
Hazard warning switch signal (H switch) |
H switch is not pressed |
10 to 14 V |
| H switch is pressed |
Below 1 V |
|||
| RSET (F3-7) - Body ground |
P - Body ground |
Hazard warning switch signal (M switch) |
M switch is not pressed |
10 to 14 V |
| M switch is pressed |
Below 1 V |
|||
| GND1 (F3-11) - Body ground |
W-B - Body ground |
Ground |
Always |
Below 1 V |
| E (F3-12) - Body ground |
LG - Body ground |
Ground (Hazard warning switch ground) |
Always |
Below 1 V |