2006-2011 Camry Aurion · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Jun 2006


INSPECT CRANKSHAFT POSITION SENSOR

  1. A097451E01
    Using an ohmmeter, measure the resistance between the terminals.

    Standard resistance:
    Temperature
    Specified Condition
    Cold
    985 to 1,600 Ω
    Hot
    1,265 to 1,890 Ω

    NOTICE:
    "Cold" and "Hot" mean the temperature of the coils themselves. "Cold" is from -10 to 50°C (14 to 122°F) and "Hot" is from 50 to 100°C (122 to 212°F).

    If the resistance is not as specified, replace the sensor.

← REMOVAL (from Jun 2006)INSTALLATION (Jun 2006 – Sep 2006) →