2006-2011 Camry Aurion · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Jun 2006


INSPECT VACUUM SWITCHING VALVE

  1. A124791E01
    Measure the resistance of the purge VSV.

    Standard resistance:
    Tester Connection
    Specified Condition
    1 - 2
    23 to 26 Ω at 20°C (68°F)
    1 - Body ground
    2 - Body ground
    10 MΩ or higher

    If the result is not as specified, replace the purge VSV.

  1. Check the operation of the purge VSV.

    1. A124792E01
      Check that air does not flow from port E to port F.

    2. A124793E01
      Apply battery voltage across the terminals.

    3. Check that air flows from port E to port F.
      If the result is not as specified, replace the purge VSV.

← REMOVAL (from Jun 2006)INSTALLATION (from Jun 2006) →