TERMINALS OF ECU
System information · Vehicles built from Oct 2006
Versions by build date: Jun 2006 – Sep 2006 from Oct 2006
| CLOCK ASSEMBLY (for LHD) |


- Standard voltage:
Terminal No. (Symbols)
Terminal Description
Condition
Specified Condition
F3-3 (IG) - Body ground
Power supply
Ignition switch off → on (IG)
Below 1 V → 10 to 14 V
- Standard resistance:
Terminal No. (Symbols)
Terminal Description
Condition
Specified Condition
F3-10 (PBEW) - Body ground
Passenger seat belt signal
The passenger seat is occupied, seat belt is fastened → unfastened
Below 1 Ω → 10 kΩ or higher
F3-19 (GND1) - Body ground
Ground
Always
Below 1 Ω