2006-2011 Camry Aurion · Service Manual RESTRAINTS

INSPECTION

Inspection · Vehicles built from Jun 2006


INSPECT FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)

  1. B150503
    for seat belt warning (only G.C.C. countries):
    Measure the resistance between terminals of the switch when the switch is operated.

    HINT:
    1. This is the inspection procedure of the inner belt switch for the seat belt warning.
    2. The circuit of the seat belt warning or airbag system cannot be inspected by this procedure.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 3
    The passenger seat is occupied, seat belt is unfastened
    Below 1 Ω
    1 - 3
    The passenger seat is occupied, seat belt is fastened
    10 kΩ or higher

← REMOVAL (from Jun 2009)INSTALLATION (Jun 2006 – Sep 2006) →