INSPECTION
Inspection · Vehicles built from Jun 2009
Versions by build date: Oct 2006 – May 2009 from Jun 2009
| INSPECT FRONT SEAT INNER BELT ASSEMBLY RH (for LHD) |
 |
- Measure the resistance between terminals of the switch when the switch is operated.
- HINT:
- This is the inspection procedure of the inner belt switch for the seat belt warning system.
- The circuit of the seat belt warning or airbag system cannot be inspected by this procedure.
- Standard resistance:
Tester Connection
|
Condition
|
Specified Condition
|
1 - 3
|
The passenger seat is occupied, with the seat belt unfastened
|
Below 1 Ω
|
1 - 3
|
The passenger seat is occupied, with the seat belt fastened
|
10 kΩ or higher
|
| INSPECT FRONT SEAT INNER BELT ASSEMBLY LH (for 2GR-FE RHD) |
 |
- Measure the resistance between terminals of the switch when the switch is operated.
- HINT:
- This is the inspection procedure of the inner belt switch for the seat belt warning.
- The circuit of the seat belt warning or airbag system cannot be inspected by this procedure.
- Standard resistance:
Tester Connection
|
Condition
|
Specified Condition
|
1 - 3
|
The passenger seat is occupied, with the seat belt unfastened
|
Below 1 Ω
|
1 - 3
|
The passenger seat is occupied, with the seat belt fastened
|
10 kΩ or higher
|