2006-2011 Camry Aurion · Service Manual TRANSMISSION

INSPECTION

Inspection · Vehicles built from Jun 2006


INSPECT BACK-UP LIGHT SWITCH ASSEMBLY

  1. B113725E01
    Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Switch Operation
    Specified Condition
    1 - 2
    Switch ON
    (Ball is not pressed)
    10 kΩ or higher
    1 - 2
    Switch OFF
    (Ball is pressed)
    Below 1 Ω

    If the result is not as specified, replace the back-up light switch.

← INSTALLATION (from Jun 2009)COMPONENTS (from Jun 2006) →