REMOVAL
Removal / installation · Vehicles built Oct 2006 – May 2009
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009
| 1.
DISCHARGE FUEL SYSTEM PRESSURE |
 |
- HINT:
-
Click here.
| 2.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
|
| 3.
REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY
|
 |
- Remove the 2 nuts and cover.
| 4.
REMOVE AIR CLEANER CAP SUB-ASSEMBLY
|
 |
- Disconnect the mass air flow meter connector (*1).
Disconnect the purge VSV connector (*2).
Disconnect the 2 purge VSV vacuum hoses (*3).
Disconnect the purge line hose from the clamp (*4).
- Disconnect the No. 2 ventilation hose from the air cleaner hose.
- Lock the No. 1 air cleaner hose clamp, and then disconnect the No. 1 air cleaner hose from the throttle body.
- Remove the 2 bolts and air cleaner cap.
Remove the air cleaner filter element from the air cleaner case.
| 5.
DISCONNECT FUEL TUBE SUB-ASSEMBLY |
 |
Using SST, disconnect the metallic type connector (Click here).
- SST
- 09268-21011
| 6.
REMOVE FUEL PRESSURE PULSATION DAMPER ASSEMBLY |
 |
- Remove the 2 bolts and fuel pressure pulsation damper.