REMOVAL
Removal / installation · Vehicles built Oct 2006 – May 2009
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009
| 1.
REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY
|
 |
- Remove the 2 nuts and cover.
| 2.
REMOVE AIR CLEANER CAP SUB-ASSEMBLY
|
 |
- Disconnect the mass air flow meter connector (*1).
Disconnect the purge VSV connector (*2).
Disconnect the 2 purge VSV vacuum hoses (*3).
Disconnect the purge line hose from the clamp (*4).
- Disconnect the No. 2 ventilation hose from the air cleaner hose.
- Lock the No. 1 air cleaner hose clamp, and then disconnect the No. 1 air cleaner hose from the throttle body.
- Remove the 2 bolts and air cleaner cap.
Remove the air cleaner filter element from the air cleaner case.
| 3.
REMOVE AIR CLEANER CASE SUB-ASSEMBLY
|
 |
- Disconnect the hose clamp.
Remove the 3 bolts and air cleaner case.
| 4.
REMOVE AIR CLEANER BRACKET |
 |
- Remove the 2 bolts and air cleaner bracket.
| 5.
DISCONNECT ECM CONNECTOR |
 |
- Disconnect the 2 ECM connectors.
- NOTICE:
- After disconnecting the connector, make sure that dirt, water and other foreign matter does not contact the connecting part of the connector.
Raise the 2 levers while pushing the locks on the levers, and disconnect the 2 ECM connectors.
| 6.
REMOVE ECM |
 |
- Remove the 3 bolts of the ECM with bracket.
Remove the ECM with bracket.
- Remove the 4 screws and ECM bracket.