2006-2011 Camry Aurion · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Jun 2006


INSPECT CAMSHAFT POSITION SENSOR

  1. A095265E01
    Measure the resistance of the sensor.

    Standard resistance:
    Tester Connection
    Specified Condition
    1 (G+) - 2 (G-)
    835 to 1,400 Ω at Cold
    1 (G+) - 2 (G-)
    1,060 to 1,645 Ω at Hot

    NOTICE:
    "Cold" and "Hot" mean the temperature of the coils themselves. "Cold" is from -10 to 50°C (14 to 122°F) and "Hot" is from 50 to 100°C (122 to 212°F).

    If the result is not as specified, replace the camshaft position sensor.

← REMOVAL (from Jun 2009)INSTALLATION (Jun 2006 – Sep 2006) →