2006-2011 Camry Aurion · Service Manual TRANSMISSION

DISASSEMBLY

Removal / installation · Vehicles built from Jun 2006


1. REMOVE FRONT DIFFERENTIAL RING GEAR

  1. C134908E06
    Put matchmarks on the front differential ring gear and differential case.

  1. C134909E01
    Remove the 10 bolts.

  1. C134910E01
    Using a plastic hammer, tap on the front differential ring gear to remove it from the case.


2. REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING

  1. C134911E01
    Using SST, remove the front differential case front tapered roller bearing from the differential case.
    SST
    09950-00020  
    09950-00030  
    09950-40011   (09957-04010)
    09950-60010   (09951-00480)

  1. D025596E02
    Using SST, remove the front differential case front tapered roller bearing outer race.
    SST
    09308-00010  


3. REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING

  1. C134912E01
    Using SST, remove the front differential case rear tapered roller bearing from the differential case.
    SST
    09950-00020  
    09950-00030  
    09950-40011   (09955-04061, 09957-04010, 09958-04011)
    09950-50013   (09951-05010, 09952-05010, 09953-05020, 09954-05021, 09955-05010)
    09950-60010   (09951-00480)
    09950-70010   (09951-07100)

  1. D025598E01
    Using SST, remove the front differential case rear tapered roller bearing outer race.
    SST
    09308-00010  


4. REMOVE FRONT DIFFERENTIAL PINION SHAFT STRAIGHT PIN

  1. C134913
    Using a pin punch and hammer, remove the straight pin.

    NOTICE:
    Before removing the straight pin, unstake it with a pin punch.


5. REMOVE FRONT NO. 1 DIFFERENTIAL PINION SHAFT

  1. C134914E02
    Remove the front No. 1 differential pinion shaft from the differential case.


6. REMOVE FRONT DIFFERENTIAL SIDE GEAR

  1. C134915E01
    Remove the 2 front differential pinions, 2 pinion thrust washers, 2 front differential side gears and 2 side gear thrust washers from the differential case.


7. REMOVE TRANSAXLE HOUSING OIL SEAL

  1. C134916E01
    Using SST and a hammer, remove the oil seal.
    SST
    09950-70010   (09951-07200)
    09950-60010   (09951-00630)


8. REMOVE DIFFERENTIAL SIDE BEARING RETAINER OIL SEAL

  1. C134917E01
    Using SST and a hammer, remove the oil seal.
    SST
    09950-70010   (09951-07100)
    09608-10010  

← REMOVAL (from Jun 2006)INSPECTION (from Jun 2006) →