2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

INSPECTION

Inspection · Vehicles built from Oct 2006


INSPECT GLOVE BOX LIGHT ASSEMBLY

  1. I044128E04
    Apply battery voltage to the glove box light assembly connector.

  1. Check that the glove box light comes on.

    OK:
    Measurement Condition
    Switch Condition
    Specified Condition
    Battery positive (+) → Terminal 2
    Battery negative (-) → Terminal 1
    Light control switch in TAIL and glove box light switch ON
    Glove box light comes on

    If the result is not as specified, replace the bulb or glove box light assembly.

← REMOVAL (from Jun 2009)INSTALLATION (Oct 2006 – May 2009) →