REMOVAL
Removal / installation · Vehicles built Oct 2006 – May 2009
Versions by build date: Oct 2006 – May 2009 from Jun 2009
| 1.
REMOVE ENGINE ASSEMBLY WITH TRANSAXLE |
 |
- HINT:
-
Click here
| 2.
SECURE ENGINE
|
 |
Secure the engine onto an engine stand with the bolts.
| 3.
REMOVE NO. 1 ENGINE MOUNTING BRACKET FRONT LH
|
 |
- Remove the 6 bolts and No. 1 engine mounting bracket front LH.
| 4.
REMOVE NO. 2 IDLER PULLEY SUB-ASSEMBLY |
 |
- Remove the 2 bolts, 2 idler pulley cover plates and 2 idler pulley sub-assemblies.
| 5.
REMOVE V-RIBBED BELT TENSIONER ASSEMBLY |
 |
- Remove the 5 bolts and V-ribbed belt tensioner assembly.
| 6.
REMOVE WATER PUMP PULLEY |
 |
- Using SST, hold the water pump pulley.
- SST
- 09960-10010
(09962-01000, 09963-00700)
Remove the 4 bolts and water pump pulley.
| 7.
REMOVE WATER INLET HOUSING |
 |
- Disconnect the water hose.
Remove the 2 bolts, nut and water inlet housing.
- Remove the water inlet housing gasket and water outlet pipe O-ring.
| 8.
REMOVE WATER PUMP ASSEMBLY |
 |
- Remove the 16 bolts, water pump assembly and water pump gasket.