DISASSEMBLY
Removal / installation · Vehicles built from Oct 2006
| 1. REMOVE DRAIN PLUG |
Remove the drain plug.
Remove the O-ring.
| 2. REMOVE RADIATOR TANK UPPER |
Install the claw to the overhaul handle, inserting it in the hole in part A as shown in the illustration.

- SST
- 09230-01010
(09231-01010, 09231-01030)
While gripping the handle, adjust the stopper bolt so that dimension B is as shown in the illustration.
- Dimension B:
- 0.2 to 0.3 mm (0.008 to 0.012 in.)
- NOTICE:
- If the stopper bolt is not adjusted, the claw may be damaged.
Using SST to release the caulking, grip the handle until stopped by the stopper bolt.

- SST
- 09230-01010
(09231-01010, 09231-01030)
Lightly tap the bracket of the radiator (or radiator hose inlet or outlet) with a soft-faced hammer and remove the tank.

Remove the O-ring.
| 3. REMOVE RADIATOR TANK LOWER |
- HINT:
- Removal procedure of the radiator tank lower is the same as that of the radiator tank upper.
| 4. REMOVE OIL COOLER ASSEMBLY |
Remove the bolt and cooler pipe (A).

Remove the nut and plate washer (B).
Remove the oil cooler (C).
Remove the 2 O-rings from the oil cooler (D).
