2006-2011 Camry Aurion · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Oct 2006


INSPECT VACUUM SWITCHING VALVE

  1. A085570E04
    Measure the VSV resistance.

    Standard resistance:
    Tester Connection
    Specified Condition
    1 - 2
    37 to 44 Ω at 20°C (68°F)
    1 - Body ground
    2 - Body ground
    10 kΩ or higher

    If the result is not as specified, replace the VSV.

  1. Check VSV operation.

    1. A128950E01
      When vacuum is applied to the E port, check that air is sucked into the filter.
      If the result is not as specified, replace the VSV.

    2. A128951E01
      Apply battery voltage across the terminals. When vacuum is applied to the F port, check that air is sucked into the E port.
      If the result is not as specified, replace the VSV.

← REMOVAL (from Oct 2006)INSTALLATION (from Oct 2006) →