REMOVAL
Removal / installation · Vehicles built Jun 2006 – May 2009
Versions by build date: Jun 2006 – May 2009 from Jun 2009
- HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.
| 2.
SEPARATE REAR DISC BRAKE CALIPER ASSEMBLY
|
 |
- Remove the bolt and separate the flexible hose from the shock absorber.
- Remove the 2 bolts and separate the rear disc brake caliper assembly.
- NOTICE:
- Use wire or an equivalent tool to keep the brake caliper from hanging down by the flexible hose.
| 3.
REMOVE REAR DISC
|
 |
- Put matchmarks on the rear disc and the axle hub.
- Release the parking brake and remove the rear disc.
- HINT:
- If the disc cannot be removed easily, turn and press the shoe adjuster firmly until the wheel comes free.
| 4.
REMOVE REAR AXLE HUB AND BEARING ASSEMBLY |
 |
Disconnect the skid control sensor connector.
- Remove the 4 bolts and hub and bearing assembly.