INSTALLATION
Removal / installation · Vehicles built from Jun 2009
Versions by build date: Oct 2006 – May 2009 from Jun 2009
| 1. INSTALL AIR FUEL RATIO SENSOR |
Using SST, install the 2 air fuel ratio sensors to the front pipe assembly.

- SST
- 09224-00010
- Torque:
- 44 N*m{ 449 kgf*cm , 32 ft.*lbf }
- NOTICE:
- The torque shown above should be used for tightening without using SST. When the SST is used for tightening, the torque should be calculated based on the length of the SST (Click here).
Connect the 2 air fuel ratio sensor connectors.
