2006-2011 Camry Aurion · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Oct 2006


INSPECT AIR FUEL RATIO SENSOR (for Bank 1)

  1. A075325E13
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 (HA1A) - 2 (+B)
    20°C (68°F)
    1.8 to 3.4 Ω
    1 (HA1A) - 4 (A1A-)
    Always
    10 kΩ or higher

    If the result is not as specified, replace the sensor.


INSPECT AIR FUEL RATIO SENSOR (for Bank 2)

  1. A075325E14
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 (HA2A) - 2 (+B)
    20°C (68°F)
    1.8 to 3.4 Ω
    1 (HA2A) - 4 (A2A-)
    Always
    10 kΩ or higher

    If the result is not as specified, replace the sensor.

← REMOVAL (from Oct 2006)INSTALLATION (Oct 2006 – May 2009) →