2006-2011 Camry Aurion · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Oct 2006


1. REMOVE ENGINE UNDER COVER LH

2. REMOVE ENGINE UNDER COVER RH

3. REMOVE FRONT EXHAUST PIPE ASSEMBLY
  1. Disconnect the 2 heated oxygen sensor (bank 1, 2 sensor 2) connectors.

  1. Remove the 2 nuts from the exhaust front pipe (left bank exhaust manifold side).

    A146046

  1. Remove the 2 bolts from the exhaust front pipe (right bank exhaust pipe manifold side).

  1. Remove the exhaust front pipe.

  1. Remove the 2 gaskets from the exhaust front pipe.


4. REMOVE HEATED OXYGEN SENSOR (for Bank 1)

  1. A135716E01
    Using SST, remove the oxygen sensor.
    SST
    09224-00010  


5. REMOVE HEATED OXYGEN SENSOR (for Bank 2)

  1. A135724E01
    Using SST, remove the oxygen sensor.
    SST
    09224-00010  

← COMPONENTS (from Oct 2006)INSPECTION (from Oct 2006) →