2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built Oct 2006 – May 2009

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009


1. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY

  1. B136405
    Install the power window regulator master switch assembly with the 3 screws.

  1. Connect the connector.


2. INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP

  1. B136876
    Engage the 4 claws and install the front door inner glass weatherstrip.


3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY
  1. Connect each connector.

  1. B136402
    Engage the front door trim board with the 4 clips of the front door inner glass weatherstrip.

  1. B132840E01
    Engage the 9 clips and install the front door trim board to the front door panel.

  1. Install the 3 screws and clip (A).


4. INSTALL COURTESY LIGHT ASSEMBLY (w/ Courtesy Light)
  1. Connect the connector.

  1. B132839
    Engage the claw and install the courtesy light assembly.


5. INSTALL ASSIST GRIP COVER

  1. B132837
    Engage the 6 claws and install the assist grip cover.


6. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG

  1. B132835
    Engage the 3 claws and install the front door inside handle bezel plug.


7. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH

  1. B132833
    Engage the 2 clips and install the front door lower frame bracket garnish.

← INSTALLATION (Jun 2006 – Sep 2006)INSTALLATION (from Jun 2009) →