INSPECTION
Inspection · Vehicles built from Jun 2006
| INSPECT DOOR CONTROL SWITCH |
Inspect driver side.

Measure the resistance of the door control switch.
- Standard resistance:
Tester Connection
Switch Condition
Specified Condition
(*1) 2 - 1
Lock
Below 1 Ω
(*1) 2 - 1
OFF (Free)
10 kΩ or higher
(*1) 9 - 1
Unlock
Below 1 Ω
(*1) 9 - 1
OFF (Free)
10 kΩ or higher
(*2) 2 - 9
Lock
Below 1 Ω
(*2) 2 - 9
OFF (Free)
10 kΩ or higher
(*2) 8 - 9
Unlock
Below 1 Ω
(*2) 8 - 9
OFF (Free)
10 kΩ or higher
*2: RHD
Inspect passenger side.

Measure the resistance according to the value(s) in the table below.
- Standard resistance:
Tester Connection
Switch Condition
Specified Condition
4 - 3
Lock
Below 1 Ω
4 - 3
2 - 3
OFF (Free)
10 kΩ or higher
2 - 3
Unlock
Below 1 Ω
