2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

REMOVAL

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Oct 2006 – May 2009 from Jun 2009


1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

  1. B226062
    Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.


2. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

  1. B226063
    Disengage the 2 clips and remove the No. 2 instrument cluster finish panel garnish.


3. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

  1. B226064
    Disengage the 2 clips and remove the No. 1 instrument cluster finish panel garnish.


4. REMOVE POSITION INDICATOR HOUSING ASSEMBLY

  1. B226065
    Disengage the 6 claws and the 3 clips, and then remove the position indicator housing assembly.


5. REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY

  1. B226097
    Disengage the 3 claws and the 5 clips.

  1. Disconnect the connector and remove the upper console rear panel sub-assembly.


6. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

  1. B133997E01
    Remove the 2 screws <F>.

  1. Disengage the 4 claws.

  1. Disconnect each connector and remove the upper console panel sub-assembly.

    HINT:
    Set the shift lever in the D position.


7. REMOVE CLEARANCE WARNING BUZZER

  1. E134838E01
    Disconnect the connector.

  1. Disengage the clamp and remove the clearance warning buzzer.

← REMOVAL (Oct 2006 – May 2009)INSPECTION (from Oct 2006) →