2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

REASSEMBLY

Removal / installation · Vehicles built Oct 2006 – May 2009

Versions by build date: Oct 2006 – May 2009 from Jun 2009


1. INSTALL HEADLIGHT GASKET (for HID Headlight)
  1. Install a new headlight gasket.

    NOTICE:
    After the headlight gasket is removed, be sure to replace it with a new one. Failure to do this may cause water ingress.


2. INSTALL LIGHT CONTROL ECU SUB-ASSEMBLY (for HID Headlight)

  1. E134241
    Connect the connector.

  1. E134240
    Install the headlight control ECU sub-assembly with the 4 screws.


3. INSTALL CLEARANCE LIGHT BULB
  1. Install the clearance light bulb to the clearance light socket.

  1. E134237
    Turn the clearance light bulb and clearance light socket in the direction indicated by the arrow and install them as a unit.


4. INSTALL FRONT TURN SIGNAL LIGHT BULB
  1. Install the front turn signal light bulb to the front turn signal light socket.

  1. E134235
    Turn the front turn signal light bulb and front turn signal light socket in the direction indicated by the arrow and install them as a unit.


5. INSTALL NO. 2 HEADLIGHT BULB (for Halogen Headlight)

  1. E134995
    Install the No. 2 headlight bulb as shown in the illustration.


6. INSTALL DISCHARGE HEADLIGHT BULB (for HID Headlight without AFS)

  1. E134788E01
    Lock the set spring to install the discharge headlight bulb as shown in the illustration.

  1. E134786
    Turn the socket of the light control ECU sub-assembly in the direction indicated by the arrow to connect the socket.


7. INSTALL DISCHARGE HEADLIGHT BULB (for HID Headlight with AFS)

  1. E134233E01
    Lock the set spring to install the discharge headlight bulb as shown in the illustration.

  1. E134231
    Turn the socket of the light control ECU sub-assembly in the direction indicated by the arrow to connect the socket.


8. INSTALL NO. 1 HEADLIGHT BULB (w/o AFS)

  1. E134782
    Install the No. 1 headlight bulb as shown in the illustration.

  1. Connect the connector.


9. INSTALL NO. 1 HEADLIGHT BULB (for HID Headlight with AFS)

  1. E134229
    Install the No. 1 headlight bulb as shown in the illustration.

  1. Connect the connector.


10. INSTALL NO. 1 HEADLIGHT BACK COVER (for HID Headlight without AFS)

  1. E134784
    Install the No. 1 headlight back cover as shown in the illustration.


11. INSTALL NO. 2 HEADLIGHT BACK COVER (w/o AFS)

  1. E134275
    Install the No. 2 headlight back cover as shown in the illustration.


12. INSTALL NO. 1 HEADLIGHT BACK COVER (for HID Headlight with AFS)

  1. E134227
    Install the No. 1 headlight back cover with the 4 screws.

← ADJUSTMENT (from Jun 2009)REASSEMBLY (from Jun 2009) →