2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

DISASSEMBLY

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Jun 2006 – May 2009 from Jun 2009


1. REMOVE REAR COMBINATION LIGHT GASKET

  1. E192201
    Remove the rear combination light gasket.

    NOTICE:
    1. Be sure to remove all traces of the old gasket from the body.
    2. Do not reuse the removed gasket. Be sure to install a new rear combination light gasket to prevent water ingress.


2. REMOVE REAR TURN SIGNAL LIGHT BULB

  1. E192202
    Turn the rear turn signal light bulb and the rear turn signal light socket in the direction indicated by the arrow shown in the illustration and disconnect them as a unit.

  1. Remove the rear turn signal light bulb from the rear turn signal light socket.


3. REMOVE REAR BUMPER RETAINER UPPER

  1. E192204
    Disengage the claw and remove the rear bumper retainer upper.


4. REMOVE REAR LIGHT GASKET

  1. E192206
    Remove the rear light gasket.

    NOTICE:
    1. Be sure to remove all traces of the old gasket from the body.
    2. Do not reuse the removed gasket. Be sure to install a new rear light gasket to prevent water ingress.


5. REMOVE BACK UP LIGHT BULB

  1. E192207
    Turn the back up light bulb and the rear light socket and wire in the direction indicated by the arrow shown in the illustration and remove them as a unit.

  1. Remove the back up light bulb from the rear light socket and wire.

← DISASSEMBLY (Jun 2006 – May 2009)REASSEMBLY (Jun 2006 – May 2009) →