2006-2011 Camry Aurion · Service Manual TRANSMISSION

INSTALLATION

Removal / installation · Vehicles built from Oct 2006


1. INSTALL AIR COOLED OIL COOLER

  1. C153486
    Install the air cooled oil cooler with the bolt and 2 nuts.

    Torque:
    7.0 N*m{ 71 kgf*cm , 62 in.*lbf }

    HINT:
    After temporarily tightening the bolt, fully tighten the 2 nuts and then bolt.

  1. Connect the 2 oil cooler hoses.


2. ADD AUTOMATIC TRANSAXLE FLUID

HINT:
Click here.


3. INSTALL ENGINE UNDER COVER LH

4. INSTALL ENGINE UNDER COVER RH
← REMOVAL (from Jun 2009)COMPONENTS (Oct 2006 – May 2009) →