INSTALLATION
Removal / installation · Vehicles built from Jun 2006
- HINT:
- When installing the name plate, heat the vehicle body and name plate using a heat light.
- Heating temperature:
Item
Temperature
Vehicle Body
40 to 60°C (104 to 140°F)
Name Plate
20 to 30°C (68 to 86°F)
- NOTICE:
- Do not heat the vehicle body and name plate excessively.
| 1. INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE |
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove the double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Clean the name plate. (If reusing the name plate)
Using a heat light, heat the name plate.
Remove the double-sided tape from the name plate.
Wipe off any tape adhesive residue with cleaner.
Apply new double-sided tape to the name plate.
Install the name plate.
Using a heat light, heat the vehicle body and name plate.
Remove the release paper from the name plate.
- HINT:
- After removing the release paper, keep the exposed adhesive free from foreign matter.
Install the name plate.


| 2. INSTALL NO. 3 LUGGAGE COMPARTMENT DOOR PLATE |
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove the double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Clean the plate. (If reusing the plate)
Using a heat light, heat the plate.
Remove the double-sided tape from the plate.
Wipe off any tape adhesive residue with cleaner.
Apply new double-sided tape to the plate.
Install the plate.
Using a heat light, heat the vehicle body and plate.
Remove the release paper from the plate.
- HINT:
- After removing the release paper, keep the exposed adhesive free from foreign matter.
Install the plate.
for Altise plate:

for ATEVA plate:

for GRANDE plate:

for Sportivo plate:

for GL plate:

for GLX plate:

for SE plate:

| 3. INSTALL NO. 4 LUGGAGE COMPARTMENT DOOR NAME PLATE |
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove the double-sided tape from the vehicle body.
Wipe off any tape adhesive residue with cleaner.
Clean the name plate. (If reusing the name plate)
Using a heat light, heat the name plate.
Remove the double-sided tape from the name plate.
Wipe off any tape adhesive residue with cleaner.
Apply new double-sided tape to the name plate.
Install the name plate.
Using a heat light, heat the vehicle body and name plate.
Remove the release paper from the name plate.
- HINT:
- After removing the release paper, keep the exposed adhesive free from foreign matter.
Install the name plate.


