2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built Oct 2006 – May 2009

Versions by build date: Oct 2006 – May 2009 from Jun 2009


1. INSTALL TURN SIGNAL FLASHER ASSEMBLY

  1. E128235E01
    Install the clamp and the turn signal flasher assembly.

  1. Connect the connector.


2. INSTALL COMBINATION METER ASSEMBLY
  1. Connect the connector.

  1. E136755
    Install the combination meter assembly as shown in the illustration.

  1. E136754
    Install the 4 screws.


3. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

  1. E128011E01
    Engage the guide and the 4 claws.

  1. Install the instrument cluster finish panel sub-assembly with the 2 clips.


4. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL (w/o Smart Entry and Start System)

  1. B144612
    Engage the 2 claws and 2 clips to install the lower instrument panel finish panel.


5. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL (w/ Smart Entry and Start System)

  1. B159330
    Connect the connector.

  1. Engage the 2 claws and 2 clips to install the lower instrument panel finish panel.


6. INSTALL NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY (for LHD)
  1. Connect each connector.

  1. B149938
    Engage the 3 claws and 2 clips to install the No. 1 instrument panel sub-assembly.


7. INSTALL NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY (for RHD)
  1. Connect each connector.

  1. B149936
    Engage the 3 claws and 2 clips to install the No. 1 instrument panel sub-assembly.


8. INSTALL STEERING COLUMN COVER

  1. B137294E01
    Engage the claw and install the upper steering column cover.

  1. Engage the 2 claws and install the lower steering column cover.

  1. Install the steering column cover with the 2 screws <D>.

    Torque:
    2.0 N*m{ 20 kgf*cm , 18 in.*lbf }


9. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

  1. B147264E01
    Install the air hose and connect the connector.

  1. Engage the 2 claws and the DLC3.

  1. Engage the claw and the 4 clips.

  1. Install the lower No. 1 instrument panel finish panel with the screw <B> and bolt <A>.


10. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH

  1. B132116E01
    Engage the 2 clips.

  1. Install the cowl side trim sub-assembly LH with the cowl side trim clip.


11. INSTALL FRONT DOOR SCUFF PLATE LH

  1. B132067
    Engage the 7 claws and 3 clips, then install the front door scuff plate LH.

← REMOVAL (from Jun 2009)INSTALLATION (from Jun 2009) →