INSTALLATION
Removal / installation · Vehicles built Oct 2006 – May 2009
Versions by build date: Oct 2006 – May 2009 from Jun 2009
| 1.
INSTALL GLOVE BOX LIGHT ASSEMBLY |
 |
- Engage the 2 claws and install the glove box light assembly.
Connect the connector.
| 2.
INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY
|
 |
- Engage the 3 claws and 3 clips.
Install the 4 screws <B>.
Install the lower instrument panel sub-assembly with the bolt <A>.
| 3.
INSTALL INSTRUMENT PANEL NO. 2 UNDER COVER SUB-ASSEMBLY
|
 |
- Engage the 4 claws and 2 guides, and install the instrument panel No. 2 under cover sub-assembly.
| 4.
INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH |
 |
- HINT:
- Use the same procedure for the RH side and the LH side (Click here).
| 5.
INSTALL FRONT DOOR SCUFF PLATE RH |
 |
- HINT:
- Use the same procedure for the RH side and the LH side (Click here).