2006-2011 Camry Aurion · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Jun 2006


1. REMOVE TAIL PIPE ASSEMBLY

  1. Remove the 2 nuts and tail pipe assembly.

    A146048

  1. Remove the gasket from the center exhaust pipe.


2. REMOVE CENTER EXHAUST PIPE ASSEMBLY

  1. Remove the 2 bolts, 2 nuts and center exhaust pipe assembly.

    A146049

  1. Remove the gasket from the front exhaust pipe.


3. REMOVE HEATED OXYGEN SENSOR

  1. A146034
    Disconnect the heated oxygen sensor connector.

  1. A146035E01
    Using SST, remove the heated oxygen sensor from the front No. 3 exhaust pipe assembly.
    SST
    09224-00010  

    NOTICE:
    Do not damage the heated oxygen sensor.


4. REMOVE FRONT EXHAUST PIPE ASSEMBLY

  1. Remove the 4 nuts, front exhaust pipe No. 1 support bracket and front exhaust pipe assembly.

    A146050

  1. Remove the gasket from the front exhaust pipe.


5. REMOVE REAR EXHAUST PIPE NO. 1 SUPPORT BRACKET

  1. A132948E01
    Remove the 2 bolts and rear support bracket.

← COMPONENTS (from Jun 2006)INSTALLATION (Jun 2006 – Sep 2006) →