INSPECTION
Inspection · Vehicles built from Oct 2006
| INSPECT COURTESY LIGHT ASSEMBLY (for Front Side) |
Apply battery voltage to the courtesy light assembly connector.

Check that the door courtesy light comes on.
- OK:
Measurement Condition
Specified Condition
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2
Door courtesy light comes on
| INSPECT DOOR COURTESY LIGHT (for Rear Side) |
Apply battery voltage to the courtesy light assembly connector.

Check that the door courtesy light comes on.
- OK:
Measurement Condition
Specified Condition
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2
Door courtesy light comes on
