ON-VEHICLE INSPECTION
Inspection · Vehicles built Jun 2006 – May 2009
Versions by build date: Jun 2006 – May 2009 from Jun 2009
| INSPECT FRONT NO. 1 SPEAKER |
- HINT:
- Remove interior parts so that the front No. 1 speaker can be seen.
Check the speaker installation.
- OK:
- The speaker is securely installed.
Visually check the speaker.
- OK:
- The cone paper of the speaker is not torn.
Speaker resistance check
Disconnect the front No. 1 speaker connector.
Measure the resistance between the terminals of the speaker.
- Standard resistance:
- Approximately 4 Ω
| INSPECT FRONT NO. 2 SPEAKER (for 6 Speaker System) |
- HINT:
- Remove interior parts so that the front No. 2 speaker can be seen.
Check the speaker installation.
- OK:
- The speaker is securely installed.
Visually check the speaker.
- OK:
- The cone paper of the speaker is not torn.
