2006-2011 Camry Aurion · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Oct 2006


INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY
  1. Resistance inspection.

    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance:
      6.9 to 7.9 Ω at 20°C (68°F)

      If necessary, replace the camshaft timing oil control valve assembly.

  1. A146245E01
    Movement inspection.

    1. Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 2, and check the movement of the valve.

      NOTICE:
      Confirm that the valve moves freely and does not stick in any position.

      If necessary, replace the camshaft timing oil control valve assembly.

      HINT:
      Accumulation of foreign objects causes subtle pressure leaks. The subtle pressure leaks will cause the camshaft to advance, and this will cause a DTC to be set.

← REMOVAL (from Jun 2009)INSTALLATION (Oct 2006 – May 2009) →