REMOVAL
Removal / installation · Vehicles built from Jun 2009
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009
| 1.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
|
| 2.
REMOVE CONSOLE BOX ASSEMBLY |
 |
- HINT:
- Refer to the procedures up to "REMOVE REAR CONSOLE BOX" (except 2GR-FE RHD Click here).
- Refer to the procedures up to "REMOVE REAR CONSOLE BOX" (for 2GR-FE RHD Click here).
| 3.
REMOVE YAW RATE AND ACCELERATION SENSOR |
 |
- Disconnect the yaw rate and acceleration sensor connector.
Remove the 2 bolts and yaw rate and acceleration sensor.
- Remove the 2 nuts and yaw rate and acceleration sensor from the bracket.